以下基本制度中主要目的在于保障行政公正原则的是（)。A．回避制度B．表明身份程序C．简易程序的适用D

r. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem？（）

A. The border router is using a proper seed metric for OSPF

B. The border router is using a proper seed metric for EIGRP

C. The administrative distance is set for OSPF and EIGRP

D. The missing OSPF routes are present in the routing table of the border router

E. The subnet keyword on the border router in the redistribute OSPF command

A. The broadcast address, and AS number

B. The network number and AS number

C. EIGRP routing, network number and passive interface

D. EIGRP routing, network number, and AS

. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes.Which two things should you verify to troubleshoot this problem？（）

A. The border router is using a proper seed metric for OSPF

B. The border ro uter is using a proper seed metric for EIGRP

C. The administrative distance is set for OSPF and EIGRP

D. The missing EIGRP routes are present in the routing table of the border router

E. The subnet keyword on the border router in the redistribute EIG RP command

uters are not becoming EIGRP neighbors. A ping between the two routers was successful.What is the next thing that should be checked？（）

A. Verify that the EIGRP hello and hold timers match exactly.

B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command.

C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command.

D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.

redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem？（）

A. The no auto - summary command needs to be added under router eigrp 1

B. The subnets keyword was not included in the redistribute command under router ospf 1

C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

D. The default - information originate command needs to be added under router ospf 1

E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

ng a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination？（）

A. ping

B. trace

C. show ip route

D. show interface

E. show cdp neighbors

see the R1 Ethernet subnet on the R4 routing ta ble. You are also not able to see the R4 Ethernet subnet on the R1 routing table.Which configuration change should be made to resolve this issue？ Select the routers where the configuration change will be required, and select the required EIGRP configur ation command(s).（）

A. R1 and R4

B. R2 and R3

C. ip summary-address eigrp 1 10.1.1.0 255.255.255.0 and ip summary - address eigrp 110.2.2.0 255.255.255.0

D. variance 2

E. eigrp stub connected

F. no auto - summary

A. The no auto - summary command has not been issued under the EIGRP process on both routers.

B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.

A.If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

B.If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

C.If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

D.If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

E.If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

F.If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

om your PC command prompt, but the output shows "request times out."

At which OSI layer is this problem associated with？

A．The data link layer

B．The application layer

C．The access layer

D．The session layer

E．The network layer