今天，整个社会都表现出对高雅艺术的关心，政府拨出专款予以扶植，企业慷慨解囊给予支持。对于一个病

A. debug eigrp packets

B. show ip eigrp traffic

C. debug ip eigrp

D. show ip eigrp interfaces

y all - links command. The variance 200 command is configured, but no other related commands are configured. Which of the following rules are true regarding R1‘s decision of what r outes to add to the IP routing table？Note that RD refers to reported distance and FD to feasible distanc E.（）

A. Adds all routes for which the metric is <= 200 * the best metric among all routes

B. Adds all routes because of the ridiculously high variance setting

C. Adds all successor and feasible successor routes

D. Adds all successor and feasible successor routes for which the metric is<=200 * the best metric among all routes

m the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checkeD.What command will display the required information？（）

A.Router# show ip eigrp adjacency

B.Router# show ip eigrp topology

C.Router# show ip eigrp interfaces

D.Router# show ip eigrp neighbors

m the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information？（）

A. Router# show ip eigrp adjacency

B. Router# show ip eigrp topology

C. Router# show ip eigrp interfaces

D. Router# show ip eigrp neighbors

A. An EIGRP route will go active if there are no successors or feasible successors in the EIGRP topology table.

B. An EIGRP route will go passive if there are no successors in the EIGRP topology table.

C. DUAL will trigger an EIGRP query process while placing the flapping routes in the holddown state.

D. A feasible successor in the EIGRP topology table can become the successor only after all the query requests have been replied to.

E. The stuck in active state is caused when the wait for the query replies have timed out.

F. EIGRP queries are sent during the loading state in the EIGRP neighbor establishment process.

d metric weights 0 0 1 0 0 has been added to the EIGRP process so that only the delay metric is used in the path calculations. Which router will R1 select as the successor and feasible successor for Network A？（）

A. R 4 becomes the successor for Network A and will be placed in the routing table. R2 becomes the feasible successor for Network A

B. R4 becomes the successor for Network A and will be included in the routing table. No feasible successor will be selected a s the advertised distance from R2 is higher than the feasible distance

C. R2 becomes the successor and will be placed in the routing table. R4 becomes the feasible successor for Network A

D. R2 becomes the successor and will be placed in the routing t able. No feasible successor will be selected as the reported distance from R4 is lower than the feasible distance

A.By adding all subnets listed by the show ip route connected command

B.By adding the subnets of working interfaces over which static neighbors have been defined

C.By adding subnets redistributed on the local router from another routing source

D.By adding all subnets listed by the show ip route static command

A. Only the path that is the feasible successor should be used.

B. Load balancing is disabled on t his router.

C. The router only performs equal - cost load balancing on all paths that have a metric greater than 1

D. The router performs equal - cost load balancing.

A．paths

B．accepted-routes

C．advertised-routes

D．routes

A. Router R1 will advertise connected and summary routes only.

B. The eigrp stub command will automatically enable summarization of routes on R2.

C. Router R1 is configured as a receive - only neighbor and will not send any connected, static, or summary routes.

D. The eigrp stub command prevents all routes except a default route from being advertised to R1.

E. The eigrp stub command prevents queries from being sent from R2 to R1.

F. Router R1 will advert ise connected and static routes. The sending of summary routes will not be permitted.