根据一定标准，可以将行政监督方式分为事前、事中和事后监督三种类型，在现代社会，最典型的事后监督

- map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.Which of the following co mmands on router R1 list subnet 10.1.1.0/24？（）

A. show ip route

B. show ip eigrp topology

C. show ip ospf topology

D. show ip eigrp topology 10.1.1.0/24

router eigrp 1. The route map named fred needs to be configured to match routes to d etermine which routes are redistributed into EIGRP.Which of the following answers lists an item that cannot be matched by route map fred？（）

A. Subnet number

B. Next - hop router IP address of the route

C. Whether the route is an E1 or E2 route

D. The ro ute‘s tag

E. The number of router hops between the router and the subnet

2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2.Which of the following LSAs must R1 use when calculating R1‘s best route for 10.1.1.0/24？（）

A. R2‘s Type 1 LSA

B. Subnet 10.1.1.0/24‘s Type 2 LSA

C. ABR1‘s Type 1 LSA in area 0

D. Subnet 10.1.1.0/24‘s Type 3 LSA in Area 0

E. Subnet 10.1.1.0/24‘s Type 3 LSA in Area 1

erfaces commands, all three links between R1 and 10.1.1.0/24 use the following settings: bandwidth: 1000, 500, 100000 and delay : 12000, 8000, 100.Which of the following answers correctly identifies a value that feeds into the EIGRP metric calculation？（）

A.Bandwidth of 101,500

B.Bandwidth of about 34,000

C.Bandwidth of 500

D.Delay of 1200

E.Delay of 2010

F.Delay of 20100

our other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers.Which of the following is true on R1？（）

A. The show ip ospf neighbors command lists two neighbors off Fa0/0.

B. The show ip ospf neighbors command lists four neighbors off Fa0/0.

C. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.

D. The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

A. Kilobits/seconD

B. Tens of microseconds

C. Cost

D. Hop count

E. No unit is assigneD

een enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP.Which one of the following is true？（）

A. R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.

B. For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.

C. For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.

D. No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

l the output related to subnet 10.11.1.0/24. How many feasible successor routes does R1 have for 10.11.1.0/24？（）P 10.11.1.0/24, 2 successors, FD is 2172419via 10.1.1.2 (2172423/2 8167), Serial0/0/0.1via 10.1.1.6 (2172423/28167), Serial0/0/0.2

A.0

B.1

C.2

D.3

The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1‘s OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0.Which of the following occurs on router R1？（）R1sh ip prefix - listip prefix - list question: 4 entriesseq 5 deny 10.1.2.0/24 ge 25 le 27seq 15 deny 10.2.0.0/16 ge 30 le 30seq 20 permit 0.0.0.0/0 le 32

A. R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1

B. R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1

C. R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE

D. R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE

1.0/24,10.1.2.0/24, and 10.1.3.0/24. These routes have metrics of 21, 22, and 23, respectively. An engineer then adds the area 0 r ange 10.1.0.0 255.255.0.0 command under the OSPF process of R1.Which of the following is true？（）

A. R1 loses and then re - establishes neighborships with all neighbors.

B. R1 no longer advertises 10.1.1.0/24 to neighbors into area 1.

C. R1 advertises a 1 0.1.0.0/16 route into area 1 with a metric of 23 (largest metric).

D. R1 advertises a 10.1.0.0/16 route into area 1 with metric of 21 (lowest metric).