我们通常将成员之间相互依赖、相互影响的集合体称作()。

A. This section is where you define all chassis clustering configuration.

B. This configuration is required for members of a chassis cluster to talk to each other.

C. You can apply this configuration in the chassis cluster to make configuration easier.

D. This section is where unique node configuration is applied.

A. user@host# set chassis cluster cluster-id 1 node 0 reboot

B. user@host> set chassis cluster id 1 node 0 reboot

C. user@host> set chassis cluster cluster-id 1 node 0 reboot

D. user@host# set chassis cluster id 1 node 0 reboot

ed to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover？（）

A. request chassis cluster manual failover group 1 node 1

B. request cluster failover redundancy-group 1 node 1

C. request chassis cluster manual failover redundancy-group 1 node 1

D. request chassis cluster failover redundancy-group 1 node 1

ple will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0？（）

A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }

B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }

C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }

D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }

A．set apply-groups node$

B． set apply-groups (node)

C． set apply-groups $(node)

D． set apply-groups (node)all

A. This interface is a system-created interface.

B. This interface belongs to node 0 of the cluster.

C. This interface belongs to node 1 of the cluster.

D. This interface will not exist because SRX 5800 devices have only 12 slots.

A. It prepends its cluster identifier to the route‘s cluster list.

B. It prepends its own originator identifier to the route‘s cluster list.

C. It replaces the route‘s cluster identifier with its own cluster identifier.

D. It replaces the route‘s originator identifier with its originator identifier.