YourcompanyhasaservernamedServer1thatrunsaWindowsServer2008CoreInstallation，andtheDNSserve

your company has a server named server1 that runs a windows server 2008 core installation, and the DNS server role. Server1 has one network interface named local area connection. The static IP address of the network interface is configured as 10.0.0.1. you need to create a DNS zone named local.contoso.com on server1. Which command should you use?（）

A.Ipconfig /registerdns: local.contoso.com

B.dnscmd server1 /zoneadd local.cotoso.com /DSPrimary.

C.Dnscmd server1 /zoneadd local.contoso.com /primary /file local.contoso.com.dns.

D.Netsh interface ipv4 set dnsserver name=local.contoso.com static 10.0.0.1 primary.

Yourcompanyhasaservernamedserver1thatrunswindowsserver2008.Server1runstheDHCPserverroleandtheDNSserverrole.Youalsohaveaservernamedservercorethatrunsaservercoreinstallationofwindowsserver2008.Allcomputersareconfiguredtouseonlyserver1forDNSresolution.Theipaddressofserver1is192.168.0.1.thenetworkinterfaceonallthecomputersisnamedLAN.Server1istemporarilyoffice.AnewDNSservernamedserver2hasbeenconfiguretousetheipaddress192.168.0.254.youneedtoconfigureservecoretouseserver2asthepreferredDNSserver.Whatshouldyoudo？（）

A.Run the netsh interfac eipv4 add dnsserve r“LAN”static 192.168.0.254index=1command.

B.Run the netsh interfac eipv4 set dnsserver“LAN”static 192.168.0.254192.168.0.1bothcommand.

C.Run the nets hinterfac eipv4 set dnsserver“LAN”static 192.168.0.254primary command and the netsh interface ipv4 set dnsserver “LAN” static 192.168.0.1both command.

D.Run the netsh interface ipv4 set dnssserver“LAN”static 192.168.0.254 primary command and the netsh interface ipv4 add dnssserver “LAN” static 192.168.0.1index=1command.

Your company has a server named Server1 that runs a Server Core installation of Windows Server 2008 R2, and the DNS Server server role. Server1 has one network interface named Local Area Connection. The static IP address of the network interface is configured as 10.0.0.1. You need to create a DNS zone named local.contoso.com on Server1.Which command should you use？（）

A. ipconfig /registerdns:local.contoso.com

B. dnscmd Server1 /ZoneAdd local.contoso.com /DSPrimary

C. dnscmd Server1 /ZoneAdd local.contoso.com /Primary /file local.contoso.com.dns

D. netsh interface ipv4 set dnsserver name=±local.contoso.co¡± static 10.0.0.1 prima

YourcompanyhasaservernamedServer1thatrunsaServerCoreinstallationofWindowsServer2008，andtheDNSServerserverrole.Server1hasonenetworkinterfacenamedLocalAreaConnection.ThestaticIPaddressofthenetworkinterfaceisconfiguredas10.0.0.1.YouneedtocreateaDNSzonenamedlocal.contoso.comonServer1.Whichcommandshouldyouuse？（）

A.ipconfig/registerdns：local.contoso.com

B.dnscmdServer1/ZoneAddlocal.contoso.com/DSPrimary

C.dnscmdServer1/ZoneAddlocal.contoso.com/Primary/filelocal.contoso.com.dns

D.netshinterfaceipv4setdnsservername=local.contoso.comstatic10.0.0.1primary

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008.Server1isaWindowsServerUpdateServices(WSUS)server.YouhaveacomputernamedComputer1thatrunsWindows7.Computer1isconfiguredtoobtainupdatesfromServer1.YouopentheWSUSsnap-inonServer1and discoverthatComputer1doesnotappear.YouneedtoensurethatComputer1appearsintheWSUSsnap-in.Whatshouldyoudo?（）

A.OnServer1，openWindowsUpdatethenselectCheckforupdates.

B.OnServer1，runWsusutil.exeandspecifythe/importparameter.

C.OnComputer1，openWindowsUpdateandthenselectChangesettings.

D.OnComputer1，runWuauclt.exeandspecifythe/detectnowparameter.

Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）

A. Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.

B. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.

C. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.

D. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008.Server1runstheDHCPserverroleandtheDNSserverrole.YoualsohaveaservernamedServerCorethatrunsaServerCoreinstallationofWindowsServer2008.AllcomputersareconfiguredtouseonlyServer1forDNSresolution.TheIPaddressofServer1is192.168.0.1.ThenetworkinterfaceonallthecomputersisnamedLAN.Server1istemporarilyoffice.AnewDNSservernamedServer2hasbeenconfiguredtousetheIPaddress192.168.0.254.YouneedtoconfigureServerCoretouseServer2asthepreferredDNSserver.Whatshouldyoudo？（）

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the company¯ Windows SharePoint Services (WSS) site to Server2.What should you do?（）

A. Use Wbadmin to restore the system state from backup.

B. Run Wbadmin with the Get Versions option. Install WSS.

C. Run Wbadmin with the Start Recovery option. Install WSS.

D. Use Wbadmin to restore the application and the sites from backup.

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companys Windows SharePoint Services (WSS) site to Server2.What should you do？（）

A. Use Wbadmin to restore the system state from backup.

B. Run Wbadmin with the Get Versions option. Install WSS.

C. Run Wbadmin with the Start Recovery option. Install WSS.

D. Use Wbadmin to restore the application and the sites from backup.

Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCPServer server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table.Server1 Computer1IP address 192.168.2.1 169.254.15.84MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FFYou need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1and Computer1.Which filter should you use？（）

A. IPv4.Address == 169.254.15.84 && DHCP

B. IPv4.Address == 192.168.2.1 && DHCP

C. Ethernet.Address == 0x000A5E1C7F67 && DHCP

D. Ethernet.Address == 0x001731D55EFF && DHCP