Yourcompanyhasaservernamedserver1thatrunswindowsserver2008.Server1runstheDHCPserverroleand

Your company has a server named Server1 that runs Windows Server 2008 R2. Server1 runs the DHCP Server server role and the DNS Server server role. You also have a server named ServerCore that runs a Server Core installation of Windows Server 2008 R2. All computers are configured to use only Server1 for DNS resolution. The IP address of Server1 is 192.168.0.1. The network interface on all the computers is named LAN.Server1 is temporarily offline. A new DNS server named Server2 has been configured to use the IP address 192.168.0.254.You need to configure ServerCore to use Server2 as the preferred DNS server and Server1 as the alternate DNS server.What should you do？（）

A. Run the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.254 index=1 command.

B. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 192.168.0.1 both command.

C. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.1 both command.

D. Run the netsh interface ipv4 set dnsserver "LAN" static 192.168.0.254 primary command and the netsh interface ipv4 add dnsserver "LAN" static 192.168.0.1 index=1 command.

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008andMicrosoftHyper-V.Server1hoststhreevirtualmachines.Companypolicystatesthatthevirtualmachinesmustnotconnecttothecompanynetwork.Youneedtoconfigureallofthevirtualmachinestoconnecttoeachother.Youmustmeetthecompanypolicy.Whichtwoactionsshouldyouperform？（）

A.SelecttheNotconnectedoptionforeachvirtualmachine.

B.EnabletheEnablevirtualLANidentificationoptionforeachvirtualmachine.

C.SettheConnectiontoHostforthenetworkinterfacecard.

D.SettheConnectiontoNoneforthenetworkinterfacecard.

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008.Server1isaWindowsServerUpdateServices(WSUS)server.YouhaveacomputernamedComputer1thatrunsWindows7.Computer1isconfiguredtoobtainupdatesfromServer1.YouopentheWSUSsnap-inonServer1and discoverthatComputer1doesnotappear.YouneedtoensurethatComputer1appearsintheWSUSsnap-in.Whatshouldyoudo?（）

A.OnServer1，openWindowsUpdatethenselectCheckforupdates.

B.OnServer1，runWsusutil.exeandspecifythe/importparameter.

C.OnComputer1，openWindowsUpdateandthenselectChangesettings.

D.OnComputer1，runWuauclt.exeandspecifythe/detectnowparameter.

Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCPServer server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table.Server1 Computer1IP address 192.168.2.1 169.254.15.84MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FFYou need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1and Computer1.Which filter should you use？（）

A. IPv4.Address == 169.254.15.84 && DHCP

B. IPv4.Address == 192.168.2.1 && DHCP

C. Ethernet.Address == 0x000A5E1C7F67 && DHCP

D. Ethernet.Address == 0x001731D55EFF && DHCP

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the company¯ Windows SharePoint Services (WSS) site to Server2.What should you do?（）

A. Use Wbadmin to restore the system state from backup.

B. Run Wbadmin with the Get Versions option. Install WSS.

C. Run Wbadmin with the Start Recovery option. Install WSS.

D. Use Wbadmin to restore the application and the sites from backup.

Your company has a server named Server1 that runs Windows Server 2008 R2. The Windows Server Backup feature is installed on Server1.Server1 fails. You install a new server named Server2 that runs Windows Server 2008 R2.You need to restore the companys Windows SharePoint Services (WSS) site to Server2.What should you do？（）

A. Use Wbadmin to restore the system state from backup.

B. Run Wbadmin with the Get Versions option. Install WSS.

C. Run Wbadmin with the Start Recovery option. Install WSS.

D. Use Wbadmin to restore the application and the sites from backup.

Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.You need to reduce the number of events registered in the system log on Printer1.What should you do?（）

A. Open the Event Viewer console. Create a custom view for the system log. Exclude the events that are notified by Event ID 10 from the filter.

B. Open the Print Management console. Open the properties of Printer1 and clear the Log spooler information events option.

C. Open the Print Management console. Open the properties of Printer1 and clear the Show informational notifications for network printers option.

D. Open the Print Management console. Open the properties of each individual printer on Printer1 and clear the Enable advanced printing features option.

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008.TheWindowsBackupandRestoreutilityisinstalledonServer1.Server1fails.YouinstallanewservernamedServer2thatrunsWindowsServer2008.&984692;YouneedtorestorethecompanysWindowsSharePointServices（WSS）sitetoServer2.Whatshouldyoudo？（）

A.UseWbadmintorestorethesystemstatefrombackup.

B.RunWbadminwiththeGetVersionsoption.InstallWSS.

C.RunWbadminwiththeStartRecoveryoption.InstallWSS.

D.UseWbadmintorestoretheapplicationandthesitesfrombackup.

YourcompanyhasaservernamedServer1thatrunsWindowsServer2008.TheWindowsBackupandRestoreutilityisinstalledonServer1.Server1fails.YouinstallanewservernamedServer2thatrunsWindowsServer2008.YouneedtorestorethecompanysWindowsSharePointServices（WSS）sitetoServer2Whatshouldyoudo？（）

A.UseWbadmintorestorethesystemstatefrombackup

B.RunWbadminwiththeGetVersionsoption.InstallWSS

C.RunWbadminwiththeStartRecoveryoption.InstallWSS

D.UseWbadmintorestoretheapplicationandthesitesfrombackup

Your company has a server named SRV1 that runs Windows Server 2008 R2. The default Print Services server role is installed on SRV1. The company wants to centralize printing on SRV1 for both UNIX and Windows users. You need to provide support to the UNIX users who print on SRV1.What are two possible ways to achieve this goal? （）

A. Install the Internet Printing role service on SRV1.

B. Install the Line Printer Daemon (LPD) Services role service on SRV1.

C. Configure the printers on SRV1 to use Line Printer Remote printing.

D. Install the File Services server role on SRV1 and activate the Services for Network File System role service.