A.damage
B.hurt
C.injury
D.profit
第1题
A.display mpls ldp session
B.display mpls ldp peer
C.debugging mpls ldp session
D.debugging mpls ldp notification
第2题
A.debugging mpls ldp
B.debugging mpls lspc
C.debugging mpls packet
D.debugging mpls peer
第3题
A.display mpls interface
B.display mpls ldp session
C.display mpls ldp peer
D.display mpls ldp lsp
第4题
A.mpls ldp remote-peer
B.mpls lsr-id
C.remote-ip
D.mpls ldp transport-address
第6题
A.如果对MPLS域进行环路检测,则必须在所有节点上都配置环路检测
B.当接口已经使能LDP后,不可以再配置LDP环路检测
C.在建立LDP会话时,要求双方的环路检测配置一致
D.修改环路检测配置不影响已经建立的LSP
第8题
路由器Router2的各接口已启用MPLS协议进程。在路由器Router2特权模式下分别输入以下3条命令:
①show mpls ldp neighbor
②show mpls ldp discovery
⑧show mpls ldp bindings
请解释以上3条配置命令各自完成什么功能?
第9题
A.修改环路检测配置不影响已经建立的LSP
B.当接口已经使能LDP后,不可以再配置LDP环路检测
C.如果对MPLS域进行环路检测,则必须在所有节点上都配置环路检测
D.在建立LDP会话时,要求双方的环路检测配置一致
第10题
A.配置正确
B.两台设备mpls lsr-id不能配置成一样
C.不需要全局使能MPLS
D.不需要在端口上使能MPLS
为了保护您的账号安全,请在“上学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!