行政诉讼法的受案范围与行政复议法的受案范围相比，（)。A．前者要广泛些B．后者要广泛些C．二者相同D．

in the switch table. What will this switch do with the frame？

A. The switch will forward the frame. to a specific port

B. The switch will forward the frame. to all ports except the port on which it was received

C. The switch will return a copy of the frame. out the source port

D. The switch will not forward unicast frames

E. The switch will remove the destination MAC from the switch table

F. None of the above.

A. an ACE server

B. a wireless network

C. an Ethernet switch

D. Odyssey Access Client

What are two characteristics of "store and forward" switching？ (Select two answer choices)

A．Latency fluctuates regardless of frame. size.

B．The switch receives the complete frame. before beginning to forward it.

C．Latency through the switch varies with frame. length.

D．The switch checks the destination address upon receipt of headers.

A. IP address

B. destination MAC address

C. ARP table entry

D. FCS checksum

ts Ethernet connection to a second connection if a network failure occurs.Which of the following provides greatest resiliency？（）

A.Two switch ports will be needed on a switch, two Ethernet cables will be needed for the server each connecting to two different Ethernet cards, and one IP address will be needed.

B.Two switch ports will be needed on two different switches, two Ethernet cables will be needed for the server each connecting to two different Ethernet cards, and one IP address will be needed.

C.Two switch ports will be needed on two different switches, two Ethernet cables will be needed for the server each connecting to two different Ethernet cards, two different IP addresses will be needed.

D.One switch port will be needed on one switch, a splitter will be needed to split the connection, two Ethernet cables will be needed for the server each connecting to two different Ethernet cards, and two different IP addresses will be needed.

d for three different VLANs: VLAN 2, VLAN 3, andVLAN 4. For the purposes of communication between VLANs a router is to beadded. Host from one VLAN should be able to reach the hosts in the other VLANs.Based on this requirement, what type of connection is acceptable between the routerand switch？（）

A. 10 Mbps Ethernet

B. 56 kbps serial

C. 100 Mbps Ethernet

D. 1,544 Mbps serial

E. 1000 Mbps Ethernet

A. Switch to host

B. Switch to switch

C. Hub to hub

D. Switch to hub

E. Host to host

A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.

B.Ensure that cables A and B are straight-through cables.

C.Ensure cable A is plugged into a trunk port.

D.Ensure the switch has power.

E.Reboot all of the devices.

F.Reseat all cables.

The Ezonexam network Topology is displayed in the exhibit below:

A switch has been configured for three different VLANs: VLAN 2, VLAN 3, and VLAN 4. For the purposes of communication between VLANs a router is to be added. Host from one VLAN should be able to reach the hosts in the other VLANs.

Based on this requirement, what type of connection is acceptable between the router and switch？

(Select all valid answers)

A．10 Mbps Ethernet

B．56 kbps serial

C．100 Mbps Ethernet

D．1,544 Mbps serial

E．1000 Mbps Ethernet