在一次考古发掘中，考古人员在一座唐代古墓中发现多片先秦时期的夔文（音kui，一种变体的龙文)陶片。

A.copier

B.microwave oven

C.toaster

D.cordless phone

E.IP phone

F.AM radio

ng the network in the exhibit. The associate knows that the server in VLAN 4 provides the necessary resources to support the user hosts in the other VLANs. The associate needs to determine which interfaces are access ports. Which interfaces are access ports? （）

A.Switch1 - Fa 0/2

B.Switch1 - Fa 0/9

C.Switch2 - Fa 0/3

D.Switch2 - Fa 0/4

E.Switch2 - Fa 0/8

F.Router - Fa 1/0

A.If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

B.If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

C.If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

D.If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

E.If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

F.If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

A.addresses chosen by a company to communicate with the Internet

B.addresses that cannot be routed through the public Internet

C.addresses that can be routed through the public Internet

D.a scheme to conserve public addresses

E.addresses licensed to enterprises or ISPs by an Internet registry organization

A.VTP

B.STP

C.ISL

D.802.1Q

E.VLSM

A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the sub-interface

B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic

C.Configure many sub-interfaces on the same subnet

D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces

Which routing protocols will support the following IP addressing scheme? （）Network 1 - 192.168.10.0 /26Network 2 - 192.168.10.64 /27Network 3 - 192.168.10.96 /27Network 4 - 192.168.10.128 /30Network 5 - 192.168.10.132 /30

A.RIP version 1

B.RIP version 2

C.IGRP

D.EIGRP

E.OSPF

A.Layer2

B.Layer3

C.Layer4

D.Layer5

E.Layer6

F.Layer7

A.By default, all defined VLANs are allowed on the trunk.

B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.

C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.

D.Each single VLAN, or VLAN range, must be specified with the vlan database command.

A.PVST+reduces the CPU cycles for all the switches in the network

B.PVST+automatically selects the root bridge location,to provide optimiz…

C.PVST+allow the root switch location to be optimized per vlan.

D.PVST+supports Layer 3 load balancing without loops.