生产、销售不符合卫生标准的化妆品，实际销售金额5万元以上，但未造成严重后果的，应定（)。A．生产、销

A. When summarization is configured, the router will also create a route to null 0.

B. The summary route remains in the route table, even if there are no more specific routes to the network.

C. Summarization is configured on a per- interface level.

D. The maximum metric for the specific routes is used as the metric for the summary route.

E. Automatic summarization across major network boundaries is enabled by default.

A.When manual summarization is configured, the router immediately creates a route that points to null0 interface

B.Manual route summarization is configured in router configuration mode when the router is configured for EIGRP routing

C.Manual route summarization is configured on the interface

D.The ip summary - address eigrp command generates a default route with an administrative distance of 5

E.When manual summarization is configured, the summary route will use the metric of the largest specific metric of the summary routes

F.The ip summary - address eigrp command generates a default route with an administrative distance of 90

A.No dynamic interior routing protocol can summarize as shown

B.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibit

C.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization points

D.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy

A.Security increases because only the network administrator may change the routing tables

B.Configuration complexity decreases as network size increases

C.Routing updates are automatically sent to neighbors

D.Route summarization is compued automatically by the router

E.Routing traffic load is reduced when used in stub network links

F.An efficient algorithm is used to build routing tables,using automatic updates

G.Routing tables adapt automatically to topology changes.

A. The broadcast address, and AS number

B. The network number and AS number

C. EIGRP routing, network number and passive interface

D. EIGRP routing, network number, and AS

A．network 172.26.168.0 area 478

B．network 172.26.0.0

C．network 172.26.168.128 0.0.0.127

D．network 172.26.168.128 area 478

A. TestKing# show eigrp entries

B. TestKing# show protocols

C. TestKing# debug eigrp routes

D. TestKing# show ip route eigrp

E. TestKing# show route eigrp

A. Use address summarization at routers C, D, E, and F

B. Use the EIGRP Stub featu re on routers C, D, E, and F

C. Use passive - interface on the spoke links in routers A and B

D. Change the administrative distance in routers A and B for routes learned from routers C, D, E,and F

A. The network is stable

B. There is a flapping link or interface, and router C knows an alternate path to the network

C. There is a flapping link or interf ace, and router C does not know an alternate path to the network

D. EIGRP is not working correctly on router C

E. There is not enough information to make a determination