A.用户
B.特权
C.全局配置
D.个性
第1题
Ri show ip route
Codes:C-connected,S-stadc,I-IGRP,R-RIP,M-mobile,B-BGP,D-EIGRP,O-OSPF
EX-EIGRP external,IA-OSPF inner area,E1-OSPF external type 1
E2-OSPF external type 2,E-EGP,I-IS-IS,L1-IS-IS level-1,
L2-IS-IS level-2,*-Candidate default,U-per-user static route
Gateway of last resort is not set
192.168.0.0/24 is subnetted,6 subnets
C 192.168.65.0 is dkrectly connected,Seriall
R 192.168.66.0 [120/1]via (10) ,00:00:08,Serial1
[120/1]via 192.168.67.2,00:00:10, (11)
C 192.168.67.0 is directly connected,Serial0
C 192.168.100.0 is directly connected, (12)
R 192.168.200.0 [120/1]via 192.168.65.1.00:00:12,Sedal1
R 192.168.300.0[120/ (13) ] via 192.168.67.2,00:00:12,Serial0
第2题
在该路由表条目信息表中,请利用左边的行号指出默认路由、直连路由、静态路由、动态路由分别对应于哪几行。
第4题
(28)
A.ip route 192.168.2.0 255.255.255.0 192.168.1.1
B.ip route 192.168.2.0 255.255.255.128 192.168.1.2
C.ip route 192.168.1.0 255.255.255.0 192.168.1.1
D.ip route 192.168.2.128 255.255.255.128 192.168.1.2
(29)
A.仅Router1#模式下
B.Router1>或Router1#模式下
C.Router1(config)#模式下
D.Router1(config-if)#模式下
(30)
A.config /all
B.route display
C.show ip route
D.show route
第5题
A.目的主机地址为192.168.7.30的数据包将被转发到地址192.168.7.9
B.该路由的目的网络地址是192.168.7.9
C.此命令中地址192.168.7.24是下一跳路由器地址
D.此命令是在接口配置模式下发出的
E.此命令用于定义一条静态路由
第6题
● (57)能够显示路由器配置了哪种路由协议
(57)
A. R1 (config)# show ip route
B. R1 > show ip route
C. R1 >show ip protocol
D. R1 (config-if)# show ip protocol
【我提交的答案】: C |
【参考答案与解析】: 正确答案:A |
【我的疑问】(如下,请求专家帮助解答)
1、show ip route 是查看路由表的
2、show 命令一般是在特权模式下
第7题
A.router rip
B.ip routing
C.rip 10.0.0.0
D.network 172.16.0.0
第9题
一台路由器的路由表如图所示。根据show ip route命令的部分输出,可以得出哪两项有关 RIP 路由协议的结论?(多选)
A、RIP 版本 2 正在此路由器及其 RIP 邻居上运行。
B、网络 172.16.0.0 的度量是 120。
C、RIP 版本 1 正在此路由器及其 RIP 邻居上运行。
D、已在 RIP 邻居路由器上使用 no auto-summary 命令。
E、RIP 会将两个网络通告给其邻居。
第10题
A.Showippath
B.Showiproute
C.Showinterface
D.Showrunning-configE.Showiprip
为了保护您的账号安全,请在“上学吧”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!