We proposed that work ______ at once.A．startB．startsC．will startD．started

A. Apply an import policy to OSPF that injects the static routes into OSPF

B. Apply an import policy to the static routes that injects the static routes into OSPF

C. Apply an export policy to the static routes that injects the static routes into OSPF

D. Apply an export policy to OSPF that injects the static routes into OSPF

A. Static routes are defined at the [edit routing-instances] hierarchy.

B. Static routes must have a next hop defined.

C. Static routes remain in the routing table until you remove them or until they become inactive.

D. Static routes are learned by neighboring devices and added to their routing tables.

A. The RIP route

B. The static route

C. The IGRP route

D. All three will load balance.

A.Apply an import policy to OSPF; this will import the static routes into OSPF

B.Apply an export policy to protocol "static"; this will export the routes to other protocols.

C.Apply an import policy to the forwarding table; this will import the routes, allowing them to be forwarded to OSPF neighbors.

D.Apply an export policy to OSPF; this will export the static routes to your OSPF neighbors.

A. The OSPF routes are located in the inet 4 routing table

B. THe OSPF routes are located in the inet 0 routing table

C. The OSPF routes are located in the inet 2 routing table

D. The OSPF routes are located in the inet 4.3 routing table

A. Accept all OSPF routes and install them into the 3 routing table

B. Accept all OSPF routes and install them into the inet7.0 routing table

C. Accept all OSPF routes and install them into the inet4.0 routing table

D. Accept all OSPF routes and install them into the inet.0 routing table

A. The OSPF routes are located in the inet4.0 routing table.

B. The OSPF routes are located in the inet.0 routing table.

C. The OSPF routes are located in the inet.2 routing table.

D. The OSPF routes are located in the inet4.3 routing table.

A. All the routes were redistributed into BGP from an IGP

B. All the routes were originated by BGP with the network command

C. All six routes will be installed in the routing table

D. Four routes will be installed in the routing ta ble

E. Two routes will be installed in the routing table

A. To influence the choice of best path (best route) for at least some routes

B. To avoid having to configure static routes

C. To allow redistribution of BGP routes into the IGP routing protocol

D. To monitor the size of the Internet BGP table

imal routing protocol traffic.Which two options provide adequate routing table information for traffic that passes between the two routers and satisfy the requests of the network administrator？（）

A.a dynamic routing procotol on InternetRouter to advertise summarized routers to CentralRouter.

B.a dynamic routing procotol on CentralRouter to advertise summarized routers to InternetRouter.

C.a static route on InternetRouter to direct traffic that is destined for 172.16.0.0/16 to CentralRouter.

D.a dynamic routing procotol on InternetRouter to advertise all routes to CentralRouer.

E.a dynamic routing procotol on CentralRouer to advertise all routes to InternetRouter

F.a static,default route on CentralRouter that directs traffic to InternetRouter.