有关行政复议与行政诉讼的区别，下列说法中正确的有()。

stigating the issues, the administrator finds that the source NAT pool is running out of addresses.To be notified that the pool is close to exhaustion, what should the administrator configure？（）

A. Use the pool-utilization-alarm raise-threshold under the security nat source stanza.

B. Use a trap-group with a category of services under the SNMP stanza.

C. Use an external script that will run a show command on the SRX Series device to see when the pool is close to exhaustion.

D. Configure a syslog message to trigger a notification when the pool is close to exhaustion.

A. telnet access does not require a password

B. nat

C. no broadcast

D. chanage of destination address in the ipv6 header

E. chanage of source address in the ipv6 header

F. autoconfiguration

IP address and network mask of 71.33.252.17/24. A Web server with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. The Web server is attached to the ge-0/0/0.0 interface of your device. You must use NAT to make the Web server reachable from the Internet using port translation.Which type of NAT must you configure？（）

A. source NAT with address shifting

B. pool-based source NAT

C. static destination NAT

D. pool-based destination NAT

d like for all of the computers to have access to the Internet at the same time, but TestKing only has four usable publicly routable IP addresses.What should be configured on the router so that all computers can connect to the Internet simultaneously？（）

A. Static NAT

B. Global NAT

C. Dynamic NAT

D. Static NAT with ACLs

E. Dynamic NAT with overload

A. static source pool

B. interface source pool

C. source pool with PAT

D. souce pool without PAT

networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem？（）Router(config)router ospf 1Router(config-router)network 10.0.0.0 255.0.0.0 area 0

A. The process id is configured improperly

B. The OSPF area is configured improperly

C. The network wildcard mask is configured improperly

D. The network number is configured improperly

E. The AS is configured improperly

F. The network subnet mask is configuerd improperly

etwork administrator configure port security on this Ezonexam device？

A．To prevent unauthorized hosts from getting access to the LAN

B．To limit the number of Layer 2 broadcasts on a particular switch port

C．To prevent unauthorized Telnet or SSH access to a switch port

D．To prevent the IP and MAC address of the switch and associated ports

E．None of the above

networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem？ （）Router(config)router ospf 1Router(config-router)network 10.0.0.0 255.0.0.0 area 0

A.The process id is configured improperly

B.The OSPF area is configured improperly

C.The network wildcard mask is configured improperly

D.The network number is configured improperly

E.The AS is configured improperly

F.The network subnet mask is configuerd improperly

trators when hardware and applications are having issues. All devices are configured with SNMP, but the administrator wants to further secure the SNMP traffic.Which of the following settings would BEST provide additional monitoring security？（）

A. Setting up a custom community name

B. Configuring the network to block traffic on port 161

C. Configuring the Windows Firewall to block port 161

D. Setting SNMP to read only on the devices

E. Installing new MIBs