You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 （SP2

You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Windows Firewall is disabled on Server1.Server1 has two network adapters named NIC1 and NIC2. Both network adapters are connected to thesame network segment. The IP address for NIC1 is 192.168.1.11. The IP address for NIC2 is192.168.1.12. You regularly connect to Server1 by using Remote Desktop Connection.The NIC1 network adapter fails.You attempt to establish a Remote Desktop connection to 192.168.1.12, but the connection fails. Yousuccessfully connect to 192.168.1.12 by using Windows Explorer.You verify that IP filtering is disabled and that no IPSec policies are assigned.You need to ensure that you can establish Remote Desktop connections to Server1.What should you do? （）

A. From Windows Firewall, enable the Remote Desktop exception.

B. From Terminal Services Manager, modify the RDP-TCP settings.

C. From the properties of NIC1, modify Internet Protocol (TCP/IP) settings.

D. From Windows Explorer, modify the %systemroot%\system32\drivers\etc\services file.

You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). WindowsFirewall is disabled on Server1.Server1 has two network adapters named NIC1 and NIC2. Both network adapters are connected to the samenetwork segment. The IP address for NIC1 is 192.168.1.11. The IP address for NIC2 is 192.168.1.12. Youregularly connect to Server1 by using Remote Desktop Connection.The NIC1 network adapter fails.You attempt to establish a Remote Desktop connection to 192.168.1.12, but the connection fails. You successfully connect to 192.168.1.12 by using Windows Explorer.You verify that IP filtering is disabled and that no IPSec policies are assigned.You need to ensure that you can establish Remote Desktop connections to Server1.What should you do?（）

A. From Windows Firewall, enable the Remote Desktop exception.

B. From Terminal Services Manager, modify the RDP-TCP settings.

C. From the properties of NIC1, modify Internet Protocol (TCP/IP) settings.

D. From Windows Explorer, modify the %systemroot%\system32\drivers\etc\services file.

You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).From the Terminal Services Configuration console, you enable remote control of user sessions.You log on to Server1 as Administrator and attempt to take remote control of the admin1 user session as shown in the exhibit. (Click the Exhibit button.)You need to ensure that you can take remote control of the admin1 user session from the TerminalServices Manager console.What should you do? （）

A. Modify the Session settings of the admin1 account.

B. Modify the Session settings of the Administrator account.

C. Connect to Server1 by using Remote Desktop Connection.

D. Add the Administrator account to the HelpServicesGroup group.

You have a terminal server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).From the Terminal Services Configuration console, you enable remote control of user sessions.You log on to Server1 as Administrator and attempt to take remote control of the admin1 user session as shown in the exhibit. (Click the Exhibit button.)You need to ensure that you can take remote control of the admin1 user session from the Terminal ServicesManager console.What should you do? （）

A. Modify the Session settings of the admin1 account.

B. Modify the Session settings of the Administrator account.

C. Connect to Server1 by using Remote Desktop Connection.

D. Add the Administrator account to the HelpServicesGroup group.

Your network contains a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Server 1 is configured as shown in the following table.You need to configure security to meet the following requirements:·Enable members of the Sales group to create, modify, and delete files and folders in the Sales folder.·Enable members of the Marketing group to create, modify, and delete files and folders in the Marketing folder.·Prevent users from modifying permissions when they access the shared files.What should you do? （）

A. Change the share permission on Userdata to Authenticated Users: Change.

B. Change the NTFS permission on Userdata to Authenticated Users: Modify.

C. Change the NTFS permission on Marketing to Marketing-group: Write. Change the NTFS permission on Sales to Sales-group: Write.

D. Remove the Userdata share. Share Sales and assign the Sales-Group group Full Control share permission. Share Marketing and assign the Marketing-Group group Full Control share permission.

Your network contains a file server named Server1 that runs Windows Server 2003 Service Pack 2(SP2).Server 1 is configured as shown in the following table.You need to configure security to meet the following requirements:·Enable members of the Sales group to create, modify, and delete files and folders in the Sales folder.·Enable members of the Marketing group to create, modify, and delete files and folders in the Marketingfolder.·Prevent users from modifying permissions when they access the shared files.What should you do?（）

A. Change the share permission on Userdata to Authenticated Users: Change.

B. Change the NTFS permission on Userdata to Authenticated Users: Modify.

C. Change the NTFS permission on Marketing to Marketing-group: Write. Change the NTFS permission on Sales to Sales-group: Write.

D. Remove the Userdata share. Share Sales and assign the Sales-Group group Full Control share permission. Share Marketing and assign the Marketing-Group group Full Control share permission.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Server1 has a shared printer named Printer1.Users report that when they attempt to connect to Printer1 they receive the following error message:The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.”On Server1, you can print a test page on Printer1.You need to ensure that when users connect to Printer1, the correct printer driver is installed.What should you do? （）

A. Configure the printer to use the LPT1 local port.

B. Configure Advanced settings in Printing Preferences.

C. Add an additional driver from the properties of Printer1.

D. Add the Allow Manage Printers permission to CREATOR OWNER.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2(SP2).Server1 has a shared printer named Printer1.Users report that when they attempt to connect to Printer1 they receive the following error message:The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want tosearch for the proper driver click OK. Otherwise, click Cancel and contact your network administrator ororiginal equipment manufacturer for the correct printer driver.”On Server1, you can print a test page on Printer1.You need to ensure that when users connect to Printer1, the correct printer driver is installed.What should you do? （）

A. Configure the printer to use the LPT1 local port.

B. Configure Advanced settings in Printing Preferences.

C. Add an additional driver from the properties of Printer1.

D. Add the Allow Manage Printers permission to CREATOR OWNER.

Your network consists of a single Active Directory domain. The domain contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Your company’s security policy states that domain users must be prevented from logging on to Server1 if a domain controller is unavailable.You disconnect Server1 from the network and discover that you can log on to Server1.You need to configure Server1 to comply with the company’s security policy.What should you do on Server1? （）

A. From the local security policy, modify the Security Options.

B. From the local security policy, modify the User Rights Assignment.

C. From Active Directory Users and Computers, modify the properties of the Server1 account.

D. From Active Directory Users and Computers, modify the properties of the Domain Computers group.

Your network consists of a single Active Directory domain. The domain contains a server namedServer1 that runs Windows Server 2003 Service Pack 2 (SP2).Your company’s security policy states that domain users must be prevented from logging on to Server1 ifa domain controller is unavailable.You disconnect Server1 from the network and discover that you can log on to Server1.You need to configure Server1 to comply with the company’s security policy.What should you do on Server1?（）

A. From the local security policy, modify the Security Options.

B. From the local security policy, modify the User Rights Assignment.

C. From Active Directory Users and Computers, modify the properties of the Server1 account.

D. From Active Directory Users and Computers, modify the properties of the Domain Computers group.