Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table.Disk1 fails. You remove Disk1 from the computer and replace it with a 250-GB basic disk named Disk2.You open the Disk Management snap-in and remove Disk1 from the mirrored volume. You are unable to addDisk2 to the mirrored volume.You need to ensure that you can add Disk2 to the mirrored volume for drive C.What should you do? （）

A. Convert Disk2 to a dynamic disk.

B. On Disk2, create a 160-GB simple volume.

C. From the Action menu, select Rescan disks.

D. Replace Disk2 with another disk that is the same size as Disks.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).Server1 has a shared printer named Printer1.Users report that when they attempt to connect to Printer1 they receive the following error message:The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want to search for the proper driver click OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver.”On Server1, you can print a test page on Printer1.You need to ensure that when users connect to Printer1, the correct printer driver is installed.What should you do? （）

A. Configure the printer to use the LPT1 local port.

B. Configure Advanced settings in Printing Preferences.

C. Add an additional driver from the properties of Printer1.

D. Add the Allow Manage Printers permission to CREATOR OWNER.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).An administrator named Admin1 logs on to Server1. Admin1 sends you a Remote Assistance invitation.You successfully establish a Remote Assistance session to Server1 by using the invitation.You request control of Server1 and you receive the following error message.You need to ensure that you can control Server1 by using Remote Assistance.What should you instruct Admin1 to do?（）

A. Add your user account to the HelpServicesGroup group.

B. Add your user account to the Remote Desktop Users group.

C. Send a Remote Assistance request by using Windows Messenger.

D. Open the System properties, and then modify the Remote settings.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table.Disk2 fails. You remove Disk2 from the computer and replace it with a new disk.You open the Disk Management snap-in and discover that the status of a disk is Missing.You initialize the new disk and convert it to a dynamic disk.You need to configure Server1 to meet the following requirements:·Prevent the loss of data on drive E.·Allow the new disk to be added to the mirror of drive E.·Allow the missing disk to be removed from the Disk Management snap-in.What should you do? （）

A. Break the mirror.

B. Remove the mirror.

C. Remove the volume.

D. Create a simple volume.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). Server1 is configured as shown in the following table.Disk1 fails. You remove Disk1 from the computer and install Disk4.You open the Disk Management snap-in and discover that the status of Disk1 is Missing. You bring Disk4 online as a dynamic disk. Disk4 has no volume on it.You need to add Disk4 to the RAID-5 volume for drive C.What should you do from the Disk Management snap-in? （）

A. From the Action menu, select Rescan disks.

B. Right-click on Disk4 and create a spanned volume.

C. Right-click on Disk2 and then click Repair Volume.

D. Right-click on Disk1 and then click Reactivate Disk.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2(SP2).Server1 has a shared printer named Printer1.Users report that when they attempt to connect to Printer1 they receive the following error message:The Server for ‘Color Laser 1000’ printer does not have the correct printer driver installed. If you want tosearch for the proper driver click OK. Otherwise, click Cancel and contact your network administrator ororiginal equipment manufacturer for the correct printer driver.”On Server1, you can print a test page on Printer1.You need to ensure that when users connect to Printer1, the correct printer driver is installed.What should you do? （）

A. Configure the printer to use the LPT1 local port.

B. Configure Advanced settings in Printing Preferences.

C. Add an additional driver from the properties of Printer1.

D. Add the Allow Manage Printers permission to CREATOR OWNER.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2(SP2). Server1 is configured as shown in the following table.Disk1 fails. You remove Disk1 from the computer and install Disk4.You open the Disk Management snap-in and discover that the status of Disk1 is Missing. You bring Disk4online as a dynamic disk. Disk4 has no volume on it.You need to add Disk4 to the RAID-5 volume for drive C.What should you do from the Disk Management snap-in? （）

A. From the Action menu, select Rescan disks.

B. Right-click on Disk4 and create a spanned volume.

C. Right-click on Disk2 and then click Repair Volume.

D. Right-click on Disk1 and then click Reactivate Disk.

Your network contains a server named Server1 that runs Windows Server 2003 Service Pack 2(SP2). Server1 is configured as shown in the following table.Disk1 fails. You remove Disk1 from the computer and replace it with a 250-GB basic disk named Disk2.You open the Disk Management snap-in and remove Disk1 from the mirrored volume. You are unable toadd Disk2 to the mirrored volume.You need to ensure that you can add Disk2 to the mirrored volume for drive C.What should you do? （）

A. Convert Disk2 to a dynamic disk.

B. On Disk2, create a 160-GB simple volume.

C. From the Action menu, select Rescan disks.

D. Replace Disk2 with another disk that is the same size as Disk0.

YournetworkcontainsaservernamedServer1thatrunsWindowsServer2003ServicePack2（SP2）.Server1hasIPSecenabled.SeveralusersreportthattheycannotconnecttoServer1.YouneedtoseehowmanyIPSecconnectionattemptsfailedduetoauthenticationfailures.Whatshouldyoudo？（）

A.FromIPSecurityMonitor，viewtheMainModeStatistics.

B.FromMicrosoftBaselineSecurityAnalyzer，scanServer1.

C.FromtheSecurityeventlog，viewtheeventsfromtheIPSecsource.

D.FromSystemMonitor，addtheIPSecV4Driver：ActiveSecurityAssociationscounter.

YournetworkcontainsaservernamedServer1thatrunsWindowsServer2003ServicePack2(SP2).Server1hasIPSecenabled.SeveralusersreportthattheycannotconnecttoServer1.YouneedtoseehowmanyIPSecconnectionattemptsfailedduetoauthenticationfailures.Whatshouldyoudo?（）

A.FromIPSecurityMonitor,viewtheMainModeStatistics.

B.FromMicrosoftBaselineSecurityAnalyzer,scanServer1.

C.FromtheSecurityeventlog,viewtheeventsfromtheIPSecsource.

D.FromSystemMonitor,addtheIPSecV4Driver:ActiveSecurityAssociationscounter.