What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation？ （）

inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）

A. neighbor 192.168.30.2 route - map as_50 out

B. neighbor 192.168.20.2 route - map as_50 out

C. route - map as_50 permit 10 match ip address 50 set metric 150 a ccess - list 50 permit 10.10.1.16 0.0.0.240

D. route - map as_50 permit 10 match ip address 50 set metric 150 access - list 50 permit 10.10.1.32 0.0.0.240

A. A routed protocol is assigned to an interface and determines the method of packet deliver.

B. A routing protocol determines the path of a packet through a network.

C. A routed protocol determines the path of a packet through a network.

D. A routing protocol operates at the transport layer of the OSI model.

E. A routed protocol updates the routing table of a router.

A. Routes learned using any IP routing protocol can only be redistributed into non IP routing protocols.

B. OSPF can import routes learned using EIGRP, RIP, and IS - IS.

C. OSPF routes cannot be exported into EIGRP, RIP, an d IS - IS.

D. At the interdomain level, OSPF cannot import routes learned using BGP.

E. OSPF routes can be exported into BGP.

A. retransmit - interval

B. de ad - interval

C. stub area

D. virtual link

E. NSSA area

A. 201.100.5.0

B. 201.100.5.32

C. 201.100.5.64

D. 201.100.5.65

E. 201.100.5.31

F. 201.100.5.1

A.workstaffattributes，suchasskillsandcommunication

B.redundancy，topreventsinglepointsoffailure

C.processes，suchasdocumentation，changecontrol，andlabs

D.appropriatetechnology，suchashardwareandsoftware

E.tools，suchasthoseformonitoringandreporting

A.Testmajorchangesbeforedeploymentanddeferminorchangesuntilduringdeployment.

B.Documentandverifyrollbackprocedures.

C.Ensureconsistencyofcodeversionsacrossthenetwork.

D.Progressivelymodifyproceduresanddocumentationduringimplementation.

A.onlyimplementedbetweenCiscosourceanddestination-capabledevices

B.statisticsprovidedbysyslog，CLI，andSNMP

C.measuresdelay，jitter，packetloss，andvoicequality

D.onlymonitorsVoIPtrafficflows

E.providesactivemonitoring

F.providespassivemonitoring

A.requiredatthedestinationtoimplementCiscoIOSIPSLAservices

B.improvesmeasurementaccuracy

C.requiredforVoIPjittermeasurements

D.providessecurityonCiscoIOSIPSLAmessagesviaLEAPorEAP-FASTauthentication

E.respondstooneCiscoIOSIPSLAoperationperport

F.storestheresultingteststatistics

nfigure RIPv2 - OSPF two - way redistribution while avoiding routing loops. Which two additio ns to the router B1 configuration should the engineer make?（）

A. access - list 40 deny 172.16.1.0 0.0.0.255 access - list 40 permit any router rip redistribute ospf 100 metric 5 distribute- list 40 out ospf 100

B. ip prefix - list rip_routes permit 172. 16.1.16/25 ge 26 le 28 route - map redis - ospf deny 10 match ip address prefix- list rip_routes router rip redistribute ospf 10 route - map redis - ospf subnets

C. ip prefix - list rip - to - ospf permit 10.1.1.8/25 ge 26 le 28 route - map redis - rip deny 20 match i p address prefix - list rip - to - ospf router ospf 100 redistribute rip route - map redis - rip subnets

D. access - list 15 deny 10.1.1.0 0.0.0.63 access - list 15 permit any route - map redis - rip deny 10 match ip address 15 route - map redis - rip permit 20 router os pf 100 redistribute rip route - map redis - rip subnets