Which of the following MOST likely causes problems with SCSI communication？（）
A. Low communication latency
B. Maximum drive capacity is exceeded
C. Improper termination
D. Too many SCSI devices on one system
第1题
red touse a static IP address. The technician notes the following configuration:Which of the following changes will allow the desktop to communicate properly with remote networks?（）
A. Changing the DNS to 172.16.1.100
B. Changing the WINS server to 172.174.136
C. Changing the netmask to 255.255.255.0
D. Changing the default gateway to 172.16.3.1
第2题
ardwarehasnotpassedWindowslogotesting”.WhichofthefollowingistheSAFESTcourseof actionfortheadministratortotake？（）
A.Continuewithinstallation
B.Install.dllfilesneededfortheprinter
C.ObtainaMicrosoftcertifieddriver
D.Restarttheprinterandtryagain
第3题
orderto remotely manage it. After calling the user and having the user open a command prompt, whichof the following commands would the administrator ask the user to type?（）
A. Netstat
B. Ifconfig
C. Hostname
D. Ping
第4题
al application will use this storage space for a database. The database will be replicated between multiple servers. Cost and performance are the most important considerations.Which of the following RAID configurations would be the BEST choice for the storage array?（）
A. RAID 6 with six 250GB hard drives
B. RAID 5 with five 250GB hard drives
C. RAID 0 with four 250GB hard drives
D. RAID 10 with eight 250GB hard drives
第5题
A.Replacethedrive
B.Restorethedrivefrombackup
C.Reboottheserver
D.ReconfigureRAID5toRAID10
第6题
A.VPN
B.KVMoverIP
C.Telnet
D.RemoteDesktop
第7题
A. The user is using a PostScript driver.
B. The printer is not on the HCL.
C. The user does not have the appropriate permissions to print.
D. The printer driver is not installed on the terminal server.
第8题
A. System Resource Monitor
B. Microsoft Baseline Security Analyzer (MBSA)
C. Replication Monitor
D. Performance Monitor
第9题
A.UPSformfactor
B.Serverformfactor
C.Serverpowersupplyswattagerating
D.Desiredruntime
第10题
trators when hardware and applications are having issues. All devices are configured with SNMP, but the administrator wants to further secure the SNMP traffic.Which of the following settings would BEST provide additional monitoring security?（）
A. Setting up a custom community name
B. Configuring the network to block traffic on port 161
C. Configuring the Windows Firewall to block port 161
D. Setting SNMP to read only on the devices
E. Installing new MIBs
