Which Junos Pulse Access Control Service client provides a built-in viewer to access local logs？（）

A. The valid cluster-id range is between 0 and 255.

B. Junos OS security devices can belong to more than one cluster if cluster virtualization is enabled.

C. If the cluster-id value is set to 0 on a Junos security device, the device will not participate in the cluster.

D. A reboot is required if the cluster-id or node value is changed.

E. Junos OS security devices can belong to one cluster only.

00 minutes and the default Juniper Networks logo on the user interface page. The second role has a maximum timeout value of 1200 minutes and a custom logo on the user interface page.Based on the merging of these two roles, which two will be applied?（）

A. A custom logo on the user interface page

B. A maximum timeout value of 600 minutes

C. A maximum time out value of 1200 minutes

D. A default Juniper Networks logo on the user interface page

A. to protect the Routing Engine

B. to protect all interfaces on the device

C. to protect the Packet Forwarding Engine

D. to protect the management interface

zonecalledUNTRUSTtotheaddressbookentryServerinazonecalledTRUST.However，theadministratordoesnotwanttheservertobeabletoinitiateanytypeoftrafficfromtheTRUSTzonetotheUNTRUSTzone.Whichconfigurationwouldcorrectlyaccomplishthistask？（）

A.A

B.B

C.C

D.D

ss, any destination-address, and any application. The policy will be a source IP policy for use with the Junos Pulse Access Control Service.What must you add to complete the security policy configuration?（）

A. The intranet-auth authentication option

B. The redirect-portal application service

C. The uac-policy application service

D. The ipsec-vpn tunnel

ry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST.However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone.Which configuration statement would correctly accomplish this task?（）

A. from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

B. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

C. from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }

D. from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

A. The ability to detect and prevent malicious traffic.

B. The ability to associate security breaches with a specific user.

C. Converged management of network and security events, network flow data, and identity information.

D. Consistent device management across administrative realms.

A. request security utm anti-virus juniper-express-engine pattern-delete

B. request security utm anti-virus juniper-express-engine pattern-reload

C. request security utm anti-virus juniper-express-engine pattern-remove

D. delete security utm anti-virus juniper-express-engine antivirus-pattern

Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI).To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）

A. CLI

B. WebUI

C. NSM

D. Junos Pulse Access Control Service

A. mode

B. preshared key

C. external interface

D. security proposals

E. dead peer detection settings