下列施工质量控制中，从关键操作与施工方法的角度进行重点控制的是（)。A．液压滑模施工时支承杆稳

. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.

When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."

Which two actions should you take to eliminate the STOP error？ (Choose Two)

A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

B．Select Safe Mode from the Windows 2000 boot menu.

C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

D．Install a driver for the SCSI controller from a floppy disk.

E．Use Device Manager to update the driver for the SCSI controller.

rtition uses the FAT file system.

You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.

However, you receive the following error message, "You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly".

You are unable to perform. the upgrade. What should you do to resolve the problem？

A．Convert the system partition to NTFS.

B．Disable Advanced Configuration and Power Interface (ACPI) support for the computer.

C．Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.

D．Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.

ray, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.

When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".

Which two actions should you take to eliminate the STOP error？ (Choose Two)

A. Modify the Boot.ini file.

B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.

C. Select Safe Mode from the Windows 2000 boot menu.

D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.

E. Install a driver for the RAID controller form. a floppy disk.

F. Use Device Manager to update the driver for the RAID controller.

rver on a new computer named VE32. VE32 needs to join an existing Windows 2000 Active Directory domain named Ezonexam.com. While installing VE32 you are unable to join the existing domain. You use another Windows 2000 Server to attempt to create a computer account for the new server in the domain. When attempting to create the new computer account you receive the following message.

Active Directory Service

The object VE32 could not be created.

The problem encountered was:

The directory service has exhausted the pool of relative identifiers.

You need to resolve the problem before continuing the installation.

What should you do？

A．Restart the domain's Global Catalog server.

B．Restart the domain's RID master server.

C．Restart the domain's PDC Emulator server.

D．Restart the domain's Infrastructure Master.

essional.

What should you do？

A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.

B．Disable the disk compression in Windows NT Workstation.

C．Install service pack four or later in Windows NT Workstation.

D．Install the distributed file system client on the Windows NT Workstation.

u install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.

Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.

What should you do？

A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.

B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.

C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.

D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.

a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.

You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.

What should you do？ (Each correct answer presents part of the solution. Choose three)

A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.

B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.

C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.

D. Create a stripped volume using Disk2, Disk3, and Disk4.

E. Create a RAID-5 volume using all disks.

F. Create a stripped volume using all disks.

G. Select the volume on Disk0 and add a mirror using Disk1.

You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.

Ezonexam1 is a backup domain controller and a member of Ezonexam.com's Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.

You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.

What should you do？

(Each correct answer presents part of the solution. Choose two.)

A．Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0

B．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.

C．Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.

D．Make any user accounts on Ezonexam1 members of Domain Global groups.

E．Convert the Windows 2000 domains to native mode.

Windows 2000家族中，运行于客户端的通常是（）。

A)Windows 2000 Server

B)Windows 2000 Professional

C)Windows 2000 Datacenter Server

D)Windows 2000 Advanced Server

provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.

You want to install the customized HAL designed for the computer. What should you do？

A．During the text mode portion of the Windows 2000 setup, install the customized HAL.

B．After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 Setup

C．After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.

D．After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.