This is the microscope ______ which we have had so much trouble.A．atB．fromC．ofD．with

rver computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.

You want to accomplish the following goals:

1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

2. Existing user environments will be maintained on the Windows 2000 Professional computers.

3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

4. The RIS image and the upgraded applications will be enabled as they are added to the network.

You take the following actions:

1. Install the RIS image on a Windows 2000 Professional computer named Computer1.

2. Install the upgraded applications on Computers1.

3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.

4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.

5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.

Which result or results do these actions produce？ (Choose all that apply.)

A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.

B．Existing user environments will be maintained on the Windows 2000 Professional computers.

C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.

D．The RIS image and the upgraded applications will be enabled as they are added to the network.

You need to install Windows 2000 Professional on 35 new computers on the company LAN.

First, you create a distribution folder on the network server. Then you create a network boot disk to install Windows 2000 Professional from the distribution folder.

Now you need to create a batch file, which the network boot disk will execute to start the installation. You must specify a source path and temporary drive for the installation files.

You also need to install the accessibility options within the batch file. The batch file must execute a hardware-specific application to run after the GUI-mode Setup has completed.

Which command must you specify in the batch file？

A．Z:\i386\winnt /s:z:\i386 /t:d: /a /e:z:\hardware\setup.exe

B．Z:\i386\winnt /s:z:\i386 /rwinnt.tmp /a /e:z:\hardware\setup.exe

C．Z:\i386\winnt32 /s:z:\i386 /tempdrive:d /cmd:z\hardware\setup.exe

D．Z:\i386\winnt32 /s:z:\i386 /cmdcons:z:\hardware\setup /makelocalsource

orkstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.

You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

What should you do？

A．Configure the DHCP scope to add additional IP addresses.

B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.

C．Modify the startup sequence in the CMOS of the remaining computers.

D．Create computer accounts on the remaining computers in the Active Directory.

you install Microsoft Windows XP Professional on the second partition of the same machine.You are able to log on to Windows XP Professional but do not have the option to boot to Windows Vista.You need to be able to dual boot the computer.What should you do？（）

A.A

B.B

C.C

D.D

main named All servers run Windows Server 2003. All client computers run Windows 2000 Professional with Service Pack 4 or Windows XP Professional.You install Software Update Services (SUS) on a computer named TestKing1. You create a GPO that configures all client computers to receive their software update from TestKing1.One week later, you run Microsoft Baseline Security Analyzer (MBSA) on all client computers to find out whether all updates are being applied. You discover that all the Windows 2000 Professional client computer received updates, but the Windows XP Professional client computers do not receive updates.You verify that the GPO setting was applied on all Windows XP Professional computers.You need to ensure that the Windows XP Professional client computers receive their updates from TestKing1.What should you do？（）

A. Make all users of the Windows XP Professional client computers members of the Administrators local group.

B. On all Windows XP Professional client computers, install Service Pack 1.

C. On all Windows XP Professional client computers, restart Automatic Updates.

D. On all Windows XP Professional client computers, delete the NoAutoUpdate value under HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU.

k contains a RIS server.

You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.

However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.

You start the computer by using a RIS bootable floppy disk, and you receive the same result.

What should you do？

A．Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

B．Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.

C．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.

D．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.

E．Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.

service pack 2 (SP2.). windows 2000 professional, or windows vista. You need to ensure all computers can use the IPv6 protocol. What should you do？（）

A.Install service pack 4 on all windows 2000 professional computers.

B.Upgrade the windows 2000 professional computers to windows XP SP2.

C.Run the IPv6.exe tool on the windows 2000 professional and windows XP computers.

D.Install active directory client extenticon. (DSClient.exe) on the windows 2000 professional and windows XP computers.

main named Servers run either Windows 2000 Server or Windows Server 2003. Client computers run either Windows 2000 Professional Service Pack 2 or Windows XP Professional.You need to implement a new software update infrastructure. You discover that security patches, critical updates, and service packs have never been installed on any client computer on the network.You install Software Update Services (SUS) on a Windows Server 2003 computer named Testking5.You must ensure that all client computers receive all Microsoft security patches, critical updates, and service packs. You want to achieve this goal as quickly as possible.Which three actions should you perform？ （）(Each correct answer presents part of the solution. Choose three)

A. Install the Automatic Updates client on all Windows 2000 Professional client computers.

B.Install the Automatic Updates client on all Windows XP Professional client computers.

C. Install SUS on a Windows 2000 Server computer.

D. Modify the Windows Update settings of the Default Domain Controller organizational unit (OU) Group Policy object (GPO) to point client computers to http://testking5.

E. Modify the Windows Update settings of the Default Domain Policy Group Policy object (GPO) to point client computers to http://testking5.

F. Upgrade all Windows 2000 Professional client computers to Windows XP Professional.

er computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform. a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.

You want to accomplish the following goals:

1. An unattended installation of Windows 2000 Professional will be performed.

2. An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.

3. Each computer will be assigned a unique security identifier description.

4. The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.

You take the following actions:

1. Install Windows 2000 Professional on a Windows 98 computer named computer1.

2. Install and configure computer standard applications on computer1.

3. Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership.

4. Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation.

Which result or results do these actions produce？ (Choose all that apply)

A．An unattended installation of Windows 2000 Professional will be performed.

B．An unattended installation of company's standard applications will be performed during the installation of Windows 2000 Professional.

C．Each computer will be assigned a unique security identifier description.

D．The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.

k. You first install Windows 2000 Professional on one of the new computers.

You log on to the computer by using the local Administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured.

You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do？

A．Run Rbfg.exe before installing the standard applications.

B．Run RIPrep.exe before installing the standard applications.

C．Copy the All Users profile to the Default Users profile.

D．Copy the local Administrator account profile to the Default Users profile