建设工程项目施工成本决策的前提是（)。A．成本控制B．成本计划C．成本预测D．成本分析

Windows 2000家族中，运行于客户端的通常是______。

A．Windows 2000 Server

B．Windows 2000 Professional

C． Windows 2000 Datacenter Server

D．Windows 2000 Advanced Server

hed to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.

You want to upgrade your computer to Windows 2000 Professional.

What should you do？

A．Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.

B．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.

C．Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.

D．Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.

You are the network administrator for Ezonexam.

Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up to a tape each night. The partition on Disk 1 stores user data. Most users at Ezonexam encrypt their files. Disk 1 fails. You replace it with a new hard disk and create a single NTFS partition.

You need to recover the data as quickly as possible while maintaining the security of the files on Disk 1.

What should you do？

A．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Instruct users to copy their files from the second file server to the new partition.

B．Restore the contents of Disk 1 from the most recent tape backup to a second file server. Log on to Ezonexam1 console as a recovery agent. Copy the files from the second file server to the new partition.

C．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Instruct the users to verify the integrity of their files.

D．Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Run the cipher command to decrypt the files.

eparate system partition and a separate boot partition as NTFS.

Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message "NTLDR is missing. Press any key to restart".

You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do？

A．Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.

B．Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.

C．Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.

D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

ted to a network that includes Windows 98 computers and Windows 2000 Server computers.

You want to install Windows 2000 Server from source files that are located on a server on the network.

What should you do？

A．Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.

B．Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.

C．On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.

D．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.

provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.

You want to install the customized HAL designed for the computer. What should you do？

A．During the text mode portion of the Windows 2000 setup, install the customized HAL.

B．After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 Setup

C．After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.

D．After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.

onal.

You create an Unattend.txt file by using Setup Manager. You copy the file to a floppy disk.

You then start the installation on a test computer by using the Windows 2000 Professional CD-ROM.

You insert the floppy disk after the computer starts.

Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input.

What should you do？

A．Add a [Data] section to Unattend.txt, and set the Unattendedinstall parameter to Yes.

B．Add an [Unattend] section to Unattend.txt, and set the OEMPreinstall parameter to yes.

C．Rename Unattend.txt on the floppy disk to Winnt.sif.

D．Create a \$Oem$\$1 folder on the hard disk of the test computer, and copy Unattend.txt to the folder.

rive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.

When the computer is restarting, you receive the following error message "NTLDR is missing. Press any key to restart".

What should you do？

A．Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.

B．Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.

C．Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.

D．Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.

Professional. You successfully upgrade computer1. During the upgrade of computer2, a series of power outages interrupts the upgrade.

You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.

What should you do？

A．On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys, Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM.

B．From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys, Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart the upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.

C．On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.

D．On computer1, perform. a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager.

Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.

You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.

What should you do？ (Each correct answer presents part of the solution. Choose two)

A．On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.

B．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.

C．Start the new computer by using a Windows 98 network boot disk.

D．Connect to \\Ezonexam1\I386 and run Winnt32.exe.

E．Connect to \\Ezonexam1\I386 and run Winnt.exe.