Which protocol automates all of the following functions for hosts on a network: IP configu

During startup, router VE1 displays the following error message:

boot: cannot open "flash:"

What will VE1 do next?

A. It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.

B. It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.

C. It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.

D. Because of damaged flash memory, the router will fail the POST.

E. It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.

F. None of the above

ted in the Ezonexam Switched LAN?

A. During high traffic periods

B. In an improperly implemented redundant topology

C. After broken links are re-established

D. When upper-layer protocols require high reliability

E. When a dual ring topology is in use

F. None of the above

Your ISP has assigned you the following IP address and subnet mask:

IP address: 199.141.27.0

Subnet mask: 255.255.255.240

Which of the following addresses can be allocated to hosts on the resulting subnet?

(Select all that apply)

A. 199.141.27.2

B. 199.141.27.175

C. 199.141.27.13

D. 199.141.27.11

E. 199.141.27.208

F. 199.141.27.112

zonexam switched LAN? (Select all that apply)

A. VLANs logically divide a switch into multiple, independent switches at Layer 2.

B. Trunk links can carry traffic for multiple VLANs.

C. VLAN implementation significantly increases traffic due to added trunking information.

D. A VLAN can span multiple switches.

E. VLANs typically increase the number of switches needed

F. VLANs typically decrease the number of switches needed

n a loop-free network?

A. RIP

B. STP

C. IGRP

D. CDP

E. VTP

F. None of the above

Which of the following need to be completed for the creation of this new VLAN? (Select all that apply)

A. The EZONEXAM VLAN must be created.

B. The desired ports must be added to the new EZONEXAM VLAN.

C. The EZONEXAM VLAN must be added to all of the domains.

D. The EZONEXAM VLAN must be named.

E. An IP address must be configured for the EZONEXAM VLAN.

F. None of the above. VLAN creations are automatic.

bridge? (Select two answer choices)

A. The BPDU version number

B. The access layer bridge setting

C. The Bridge ID

D. The spanning-tree update number

E. The bridge priority

F. The VLAN number

rovides a method of sharing VLAN configuration information between these two switches?

A. STP

B. 802.1Q

C. VLSM

D. ISL

E. VTP

F. HSRP

G. None of the above

their MAC address. What will prevent workstations with unauthorized MAC addresses from connecting to the network through a switch?

A. BPDU

B. Port security

C. RSTP

D. STP

E. VTP

F. Blocking mode

In the Ezonexam switched LAN environment, what does the IEEE 802.1Q standard describe?

A. VLAN pruning

B. A method of VLAN trunking

C. An approach to wireless LAN communication

D. The operation of VTP

E. The process for root bridge selection

F. None of the above