A "wet cargo" refers to ______.A.a cargo that will be damaged if it gets wetB.bulk liquids

What is a wet cargo ________．

A.A liquid cargo carried in the deep tanks

B.A canned or bottled liquid such as beer

C.A cargo that contains hygroscopic moisture

D.A cargo particularly susceptible to damage by moisture

Which can be prevented only by segregating two lots of cargo into separate holds？

A.Contamination of dry cargo by a wet cargo

B.Contamination of a clean cargo by a dirty cargo

C.Contamination of a food cargo by an odorous cargo

D.Overcarriage，overstowage，and short landing

of different commodities．

A. cargo handling machines

B. deck winches and derricks

C. engine-room tools

D. course controlling system

the cargo holds adjacent to the block of loaded cargo holds empty．

A.Alternate hold loading condition

B.Block hold loading condition

C.Part hold loading condition

D.Homogeneous hold loading condition

A "strongback" refers to a ______.

A.bar securing a cargo port

B.centerline vertical bulkhead

C.deep beam

D.spanner stay

Bulk cargo refers to ______.

A.cargo which occupies a large volume of space

B.cargo which requires refrigeration

C.cargo which is very dense

D.homogeneous cargo not enclosed in a container

WPA in additon to TPND, but the vessel was detained as a result of the Iran-Iraq war. The importer lodged a claim to the insurance company. Can the importer be compensated？ Are the following analysis correct？（）。

A、TPND refers to the cargo being stolen partially or totally and leads to non-delivery by the consignee at destination.So the insurance company shall not compensate,from this instance

B、Wanting to get compensation ,failure to deliver risk shall be covered

C、Only we covered War Risk,can we get compensation from the insurance company

D、In this instance,the importer can get compensation from the insurance company

作业题 1. A _________ is a device used to convert saturated steam or wet steam into superheated steam or dry steam. A. nanoelectronics B. nanometer C. superconductor D. superheater 2. _________ refers to the use of nanotechnology in electric components. A. nanoelectronics B. nanometer C. superconductor D. superheater 3. _________ is a unit of length in the metric system, equal to one billionth of a metre. A. nanoelectronics B. nanometer C. superconductor D. superheater 4. By permitting electricity to travel freely, without resistance, such a _________ could dramatically improve the efficiency of power transmission technologies. A. nanoelectronics B. nanometer C. superconductor D. superheater