You are the network administrator for Ezonexam.You plan to upgrade 550 computers from Wind

设置数据库属性窗口有（ ）种选项卡。

A. 2 

B. 3 

C. 4 

D. 5 

drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.

Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.

One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:

"Boot disk or operating system not found".

You use Recovery Console to discover that the files on partition C are corrupted.

You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.

What should you do?

A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.

B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.

C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.

D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

You work as one of ten network administrators at theBostonoffice of Ezonexam.com.

The Ezonexam.com network includes Windows 2000 Professional client computer, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Ezonexam employees who use the Windows operating systems stores files on a shared folders on a Windows 2000 Server computer that is named EzonexamFileServerA.

You are now required to make the shared folders on EzonexamFileServerA available for the Ezonexam staff that uses UNIX computers.

What action should you take?

A．Install and configure NFS (Network File System) on EzonexamFileServerA.

B．Configure data volumes on EzonexamFileServerA to be FAT volumes.

C．Disable Server Message Block (SMB) signing on EzonexamFileServerA.

D．Install Simple TCP/IP Services on EzonexamFileServerA.

Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.

You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.

What should you do? (Each correct answer presents part of the solution. Choose two)

A．On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.

B．On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.

C．Start the new computer by using a Windows 98 network boot disk.

D．Connect to \\Ezonexam1\I386 and run Winnt32.exe.

E．Connect to \\Ezonexam1\I386 and run Winnt.exe.

u install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.

Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.

What should you do?

A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.

B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.

C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.

D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.

on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.

You want to upgrade all of the critical system files and patches on the server in the shortest possible time.

What should you do?

A．Use Windows Update.

B．Run System File Checker.

C．Log on as administrator and run Windows Update.

D．Log on as administrator and run System File Checker.